Availability: | |
---|---|
The MCP Fixed crusher is the ideal equipment for secondary demolition, the work of reduction and fragmentation of the demolished material is extremely useful in order to facilitate its disposal and recycling, separating the iron reinforcement in concrete.
The MCP-IT line is equipped with a completely interchangeable mouth, in this way the equipment will result in constant and regular state of efficiency.
1.Sturdy and compact structure: The pulveriser is built with high wear resistant materials with a hardness of HB400.The profile of the mouth is reinforced to further improve the resistance to wear and make the structure
even more compact.
2.Blades: On each model there are blades for rebars cutting.The blades can be turned into its own different sides to recover the correct cutting profile.
3.Excellent release of processed material:The specific openings of the fixed body make the unloading of demolished material easier, while maintaining the performance and productivity of the attachment.
4.Interchangeable parts:The design of the mouth of the new MCP-IT pulveriser has been studied to increase the productivity of the attachment.By replacing the interchangeable worn parts it is possible to restore the original profile of the mouth to recover the original performance of the attachment.
5.A cylinder with great power and high speed:The presence of a speed valve allows an increase in the number of opening and closing cycles of the pulverizer and for the hydraulic circuit of the excavator to be preserved.
Tip 1: Make sure of the diameter and the cutting table of the object
1) Weight
2) Working pressure
3) Oil flow
4) Force
5) Max Ø to be cut
Tip 2: Makesure of the weight of excavator, the oil flow and the working pressure of your excavator.
Item | Unit | MCP480 | MCP600 | MCP700 | MCP800 | MCP910 |
Excavator weight | (t) | 4-10 | 10-18 | 16-22 | 18-25 | 25-35 |
Tool weight* | (kg) | 450 | 1000 | 1650 | 2050 | 2850 |
Cylinder force | (t) | 71 | 100 | 120 | 145 | 157 |
Force at upper tips F1 (front teeth) | (t) | 39 | 54 | 66 | 73 | 99 |
Force in the middle F2 (middle of blade) | (t) | 60 | 79 | 93 | 115 | 153 |
Cutting force F3 | (t) | 130 | 155 | 222 | 196 | 276 |
Hydraulic working pressure | (bar) | 220-280 | 280-320 | 280-320 | 280-320 | 280-320 |
Oil flow | (l/min) | 80-100 | 100-180 | 100-180 | 180-220 | 220-280 |
Rotation type | NO ROT. | NO ROT. | NO ROT. | NO ROT. | NO ROT. | |
Time of closing at max oil flow | (s.) | 3,4 | 3,09 | 2.28 | 2,28 | 2,94 |
Time of opening at max oil flow | (s.) | 2,4 | 1,88 | 2.25 | 2,26 | 2,74 |
N°of cycles per minute at max oil flow | (cycles/min) | 10,4 | 12,1 | 15 | 13,2 | 10,6 |
Hyd. ports size cylinder | / | 1/2''SAE 6000 p.s.i. | 1'' SAE 6000 p.s.i. | 1'' SAE 6000 p.s.i. | 1'' SAE 6000 p.s.i. | 1''1/4 SAE 6000 p.s.i. |
Speed valve | / | NO | Optional | Yes | Yes | Yes |
Max diameter to be cut** | (mm) | 25 | 50 | 50 | 55 | 60 |
Blade length | (mm) | 120 | 122 | 200 | 180 | 180 |
Interchangeable wear parts | / | NO | NO | NO | Yes | Yes |
Automatic grease system | / | NO | NO | NO | NO | NO |
The MCP Fixed crusher is the ideal equipment for secondary demolition, the work of reduction and fragmentation of the demolished material is extremely useful in order to facilitate its disposal and recycling, separating the iron reinforcement in concrete.
The MCP-IT line is equipped with a completely interchangeable mouth, in this way the equipment will result in constant and regular state of efficiency.
1.Sturdy and compact structure: The pulveriser is built with high wear resistant materials with a hardness of HB400.The profile of the mouth is reinforced to further improve the resistance to wear and make the structure
even more compact.
2.Blades: On each model there are blades for rebars cutting.The blades can be turned into its own different sides to recover the correct cutting profile.
3.Excellent release of processed material:The specific openings of the fixed body make the unloading of demolished material easier, while maintaining the performance and productivity of the attachment.
4.Interchangeable parts:The design of the mouth of the new MCP-IT pulveriser has been studied to increase the productivity of the attachment.By replacing the interchangeable worn parts it is possible to restore the original profile of the mouth to recover the original performance of the attachment.
5.A cylinder with great power and high speed:The presence of a speed valve allows an increase in the number of opening and closing cycles of the pulverizer and for the hydraulic circuit of the excavator to be preserved.
Tip 1: Make sure of the diameter and the cutting table of the object
1) Weight
2) Working pressure
3) Oil flow
4) Force
5) Max Ø to be cut
Tip 2: Makesure of the weight of excavator, the oil flow and the working pressure of your excavator.
Item | Unit | MCP480 | MCP600 | MCP700 | MCP800 | MCP910 |
Excavator weight | (t) | 4-10 | 10-18 | 16-22 | 18-25 | 25-35 |
Tool weight* | (kg) | 450 | 1000 | 1650 | 2050 | 2850 |
Cylinder force | (t) | 71 | 100 | 120 | 145 | 157 |
Force at upper tips F1 (front teeth) | (t) | 39 | 54 | 66 | 73 | 99 |
Force in the middle F2 (middle of blade) | (t) | 60 | 79 | 93 | 115 | 153 |
Cutting force F3 | (t) | 130 | 155 | 222 | 196 | 276 |
Hydraulic working pressure | (bar) | 220-280 | 280-320 | 280-320 | 280-320 | 280-320 |
Oil flow | (l/min) | 80-100 | 100-180 | 100-180 | 180-220 | 220-280 |
Rotation type | NO ROT. | NO ROT. | NO ROT. | NO ROT. | NO ROT. | |
Time of closing at max oil flow | (s.) | 3,4 | 3,09 | 2.28 | 2,28 | 2,94 |
Time of opening at max oil flow | (s.) | 2,4 | 1,88 | 2.25 | 2,26 | 2,74 |
N°of cycles per minute at max oil flow | (cycles/min) | 10,4 | 12,1 | 15 | 13,2 | 10,6 |
Hyd. ports size cylinder | / | 1/2''SAE 6000 p.s.i. | 1'' SAE 6000 p.s.i. | 1'' SAE 6000 p.s.i. | 1'' SAE 6000 p.s.i. | 1''1/4 SAE 6000 p.s.i. |
Speed valve | / | NO | Optional | Yes | Yes | Yes |
Max diameter to be cut** | (mm) | 25 | 50 | 50 | 55 | 60 |
Blade length | (mm) | 120 | 122 | 200 | 180 | 180 |
Interchangeable wear parts | / | NO | NO | NO | Yes | Yes |
Automatic grease system | / | NO | NO | NO | NO | NO |
content is empty!