How to operate the earth auger correctly
Publish Time: 2017-06-06 Origin: Site
1 First you should check whether the earth auger model is matched with the excavator.
2 Check the pin hitch size.
3 According to the operation manual, installing the earth auger correctly.
4 After the installation is completed, check whether the flow and pressure of the excavator can reach the required power of the earth auger, but not more than the range of the earth auger.
5It is necessary that the auger is vertically down in the drilling process and can be adjusted at any time.
6 After the hole was drilled up, it should stop drilling, the auger will be put into the hole slowly.
7 Put forward after the soil discharge, continue to drill.