Concrete Jaw Hardox Stone Asphalt Concrete Crusher Bucket for 5-40T Excavator
Product Description
Product Description
Excavator Crusher Bucket
A bucket crusher or crusher bucket is a type of jaw crusher. It's an attached tool for excavators for built-in crushing construction waste and demolition materials. It has the design of a shovel, which is open at the rear for releasing the shredded material. Compared to normal jaw crushers, the jaw crusher bucket has a lower production, but can be transported more easily and only needs an excavator to operate.
Bucket crushers are primarily employed in mining and demolition for the breaking-down of crude minerals, concrete and masonry.
Working Principle
Its way of working consists on a bucket with two crushing jaws inside, one of them is fixed and the other one is driven by motor directly and moves back and forth relative to it, has a unique, aggressive figure-eight crushing motion that produces high quality cubical product, enabling the aggregate to be reused on site.
Application
The crushing bucket is widely used in quarrying, mining, gravel and building materials recycling. RAY crushing bucket is suitable for 5-40 ton excavators. The crushing bucket is compact, multi-purpose and suitable for crushing and recycling of inert materials, or due to demolition construction materials (road engineering-infrastructure-pipelines and pipelines).
Model |
Unit |
RMB50 |
RMB60 |
Carrier Weight |
T |
5-10 |
10-20 |
Working Pressure |
Bar |
150-280 |
150-320 |
Working Oil Flow |
L/min |
90-120 |
120-200 |
Weight |
Kg |
850 |
2300 |
Bucket Capacity |
Cbm |
0.3 |
0.7 |
Size |
mm |
1450*950*1030 |
2115*1195*1360 |
Bucket Opening Size |
W*H(mm) |
620*280 |
720*460 |
Output（T/H) |
15mm |
10 |
19 |
20mm |
11 |
22 |
|
30mm |
14 |
25 |
|
40mm |
18 |
30 |
|
50mm |
22 |
34 |
|
60mm |
24 |
39 |
|
70mm |
/ |
43 |
|
80mm |
/ |
45 |
|
90mm |
/ |
51 |
|
100mm |
/ |
56 |
|
110mm |
/ |
61 |
|
120mm |
/ |
66 |
|
130mm |
/ |
71 |
Model |
Unit |
RMB80 |
RMB120 |
Carrier Weight |
T |
20-30 |
30-40 |
Working Pressure |
Bar |
≤230 |
≤230 |
Working Oil Flow |
L/min |
150-200 |
190-230 |
Weight |
Kg |
3500 |
5500 |
Bucket Capacity |
Cbm |
0.8 |
1.3 |
Size |
mm |
2080*1425*1600 |
2500*1650*1800 |
Bucket Opening Size |
W*H(mm) |
910*510 |
1350*540 |
Output（T/H) |
20mm |
12 |
20 |
30mm |
15 |
25 |
|
40mm |
18 |
28 |
|
50mm |
22 |
30 |
|
60mm |
25 |
33 |
|
70mm |
28 |
35 |
|
80mm |
30 |
40 |
|
90mm |
33 |
43 |
|
100mm |
35 |
47 |
|
110mm |
/ |
50 |
|
120mm |
/ |
55 |
|
130mm |
/ |
58 |
Product Advantages
1. Main frame
2. Upper jaw – added wear strips, more wear-resistant, safe and easy to replace
3. Crushing plate – allows material to flow freely through the jaw plate
4. Bucket teeth + wear-resistant bottom plate – longer service life
5. Vertical wear plate + thickened base plate – provides a solid frame and reduces wear
6. Adjustable knot pad – allows for quick change of fragment size
7. Protected belt drive – no maintenance, no adjustment required
*Simple operation and maintenancee
*Contains HARDOX material, efficient and durable
*High productivity
*Save time and reduce gostsy
*Crushing jaw plate is easy to replace*Particle size adjustment without special tools
lmported ltaly SAl motor.
RAY adopts the independent design, and the hydraulic motor drivedirectly, and make maintenance easier.
Mn18Cr2MoNi wear plate made the crushing plate make it a long lifetimeOn average 8 hours per day, 6 months change one set crushing plate.
Bucket opening size is 1600*500mm, the inlet can reach 500*900mm, butthe outlet can be as small as 10mm, which is as big as a fingernail.
Compared with belt type, our maintenance is more convenientWe only need to fill reserved grease ports regularly.
Crushing construction waste/concrete- discharge hole 4cm- one hourcrushing about 40-50T. Crushing Blue stone( hard rocks)- discharge hole 4cm- one hour crushingabout 20T.
1.Belt drive reduces damage to the excavator hydraulic system and reduces after-sales costs
2.Widest crusher mouth opening of the equipment, available in China market (910*510mm)
3.Guaranteed output productivity even with worn-out jaws
4.The feed port is 10mm thicker, making it more wear-resistant
5.Special processing technology, better coaxiality and longer service life
6.High strength wear-resistant plate increased life-time more than 30% The jaw plate is made of Mn18cr2 material, The framework uses NM400
Product Feedback