Brand new Vibro Ripper Mining equipment
Product Description
What’s the working principle of Vibro Ripper?
Vibro Ripper is an excavator attachment that hydraulic oil power be transfered to hydraulic motor and produces vibration of eccentric gear in the rotation,then generate centrifugal force.
The vertical component F sin wt force for periodic variation of interference, make the pressure of the radial forced vibration of the shaft is called vibration force.Vibration box pass exciting force to the bucket tooth, and crushing operations.
Vibro Ripper Parameters
Model | RVR-30 | RVR-40 | RVR-50 | RVR-60 | RVR-E5 | RVR-E6 | RVR-D6 | RVR-D8 | RVR-D10 | |
Power(KW) | 68 | 79 | 95 | 120 | 140-180 | 180-200 | 160-200 | 190-230 | 210-240 | |
Motor type(CC) | 90 | 108 | 125 | 160 | 90*2 | 108*2 | 90*2 | 108*2 | 130*2 | |
Impact power(KN) | 286 | 300 | 370 | 430 | 450 | 691 | 468 | 599 | 736 | |
Size | Length | 2700mm | 2700mm | 2800mm | 3100mm | 3400mm | 3685mm | 4500mm | 4800mm | 4850mm |
Width | 1200mm | 1200mm | 1250mm | 1250mm | 1207mm | 1246mm | 1300mm | 1300mm | 1400mm | |
Height | 1500mm | 1500mm | 1550mm | 1650mm | 1780mm | 1815mm | 1650mm | 1850mm | 1850mm | |
Working flow(L/min) | 160-200 | 190-220 | 225-250 | 288-295 | 324-295 | 410-440 | 360-400 | 420-460 | 450-500 | |
Working pressure(Mpa) | 25 | 25 | 25 | 25-26 | 25-26 | 25-26 | 25-28 | 25-28 | 25-28 | |
Weight(Kg) | 3600 | 3800 | 4300 | 5000 | 5500 | 6200 | 6500 | 7600 | 9200 | |
Excavator weight(T) | 22-26 | 28-30 | 30-33 | 36-45 | 38-45 | 50-65 | 50-65 | 70-90 | 100-190 | |
RVR-XX TYPE IN SINGLE MOTOR, RVR-EX TYPE IN DOUBLE MOTORS, RVR-DX TYPE IN DOUBLE MOTORS AND TWO SET OF ECCENTRIC GEAR. |
The vibro ripper working area generate small earthquake to make rock collapsce immediately.The impact could up to 1600-2400 times per minute.