Article List

• How to use pile driver

  The vibrating sinking pile machine uses its high-frequency vibration to vibrate the pile body at high speed, and transmits the vertical vibration generated by the machine to the pile body, which causes the soil structure around the pile body to change due to vibration, the strength is reduced, and t

  Pile Driver April 26, 2019
• Working principle and construction principle of pile driver

  Operating principle: 1. The high-frequency pile driver has two eccentric shafts driven by hydraulic motor to generate high-speed rotation and vertical resonance excitation force. By damping the rubber block, maintaining the amplitude of 3-8mm can meet the requirements of various types of soil p

  Pile Driver April 22, 2019
• How to operate vibro ripper ?

  It is necessary to read this operating manual before starting the operation or work.1. Before the operation, check whether the lubricating points of VIBRO RIPPER are filled with grease!2. Whether the hydraulic system's various hydraulic pipe joints are firmly connected.

  Vibro Ripper March 18, 2019
• How to improve the vibratory hammer’s function

  RAY ATTACHMENTS Hydraulic Vibro hammer can be applied in pile driving and pulling cement piles, steel track piles, iron plate and H steel pipes. It can pile piling and pulling between quickly change conversion operations.

  Pile Driver March 14, 2019
• How to choose a pile breaker

  What’s pile breaker? It is an equipment for concrete cropper. It can be easily operated with high efficiency, low noise, low cost, safety and reliability, without any impact on the main body of the pile, and without any effect on the load-bearing capacity of the pile as well. You may focus on the si

  Pile Breaker March 15, 2019
• Made in China, you deserve it

  In 2017, China's economy is growing strongly, shifted from rapid growth to high-quality development and usher in a new round of golden opportunities!Reasonable use of the auger drive is a concern of engineers from all over the world.Continuing the upward trend of 2016, the whole construction machine

  Company News February 20, 2019
• RAY vibratory hammer

  What’s Pile Hammer" vibratory hammer" is a tool used to drive piles in or out of the ground for building marine docks, bridges, buildings, roads, rail, walls, and many other types of foundations.The range for suitable excavator is from 20-40T. The pile length is 9m to 16m. Vibratory pile hammers con

  Pile Driver January 25, 2019
• Vibration Hammer For Excavator

  Highway hydraulic Vibra hammer is a commonly used equipment in highway engineering, also known as guardrail pile driver/road guardrail pile driver. Commonly used pile drivers in construction projects include hydraulic walking type diesel hammer pile driver and high frequency hydraulic vibration pile

  Pile Driver January 18, 2019
• Hydraulic breaker types

  According to the type of power, the breakers can be divided into the following three types, namely: pure nitrogen type, pure hydraulic type and nitrogen hydraulic combined type. You can find out which type is used on your excavator according to the example below.图一 Nitrogen Type:Cut off the pressure

  Hydraulic Breaker January 24, 2019
• What you should pay attention when you use vibro ripper ?

  1. The working characteristic of Vibro Ripper is not to directly crush the target crusher, but the high-frequency impact causes the vibrating loose tooth portion to fall into the mountain and destroy the original structure of the mountain and cause cracks on the entire surface of the rock. As long a

  Vibro Ripper January 21, 2019