Concrete Jaw Hardox Stone Asphalt Concrete Crusher Bucket for 20-27T Excavator

Product Description

Concrete Jaw Hardox Stone Asphalt Concrete Crusher Bucket for 20-27T Excavator Products Description

Excavator Crusher Bucket

A bucket crusher or crusher bucket is a type of jaw crusher. It's an attached tool for excavators for built-in crushing construction waste and demolition materials. It has the design of a shovel, which is open at the rear for releasing the shredded material. Compared to normal jaw crushers, the jaw crusher bucket has a lower production, but can be transported more easily and only needs an excavator to operate.

Bucket crushers are primarily employed in mining and demolition for the breaking-down of crude minerals, concrete and masonry.

Working Principle

Its way of working consists on a bucket with two crushing jaws inside, one of them is fixed and the other one is driven by motor directly and moves back and forth relative to it, has a unique, aggressive figure-eight crushing motion that produces high quality cubical product, enabling the aggregate to be reused on site.

Application

The crushing bucket is widely used in quarrying, mining, gravel and building materials recycling. The crushing bucket is suitable for excavators weighing more than 20 tons. The crushing bucket is compact, multi-purpose and suitable for crushing and recycling of inert materials, or due to demolition construction materials (road engineering-infrastructure-pipelines and pipelines).

Model		RMB80	RMB120
Excavator	Ton	20-27	33-40
Weight	Kgs	3500	5500
Bucket capacity	cbm	0.8	1.3
Size	mm	208014251600	250016501800
Bucket opening size	W*H(mm)	910*510	1350*540
Hydraulic motor	oil pressure(bar)	≤230	≤230
Hydraulic motor	Oil quantity(L/min)	150-200	190-230
Output（T/H)	20mm	12	20
	30mm	15	25
	40mm	18	28
	50mm	22	30
	60mm	25	33
	70mm	28	35
	80mm	30	40
	90mm	33	43
	100mm	35	47
	110mm	/	50
	120mm	/	55
	130mm	/	5

RMB80 Crusher Bucket Our Advantages

1. Imported Italy SAI motor.

2. RAY adopts the independent design, and the hydraulic motor drive directly, and make maintenance easier.

3. Mn18Cr2MoNi wear plate made the crushing plate make it a long lifetime. On average 8 hours per day, 6 months change one set crushing plate.

4. Bucket opening size is 1600*500mm, the inlet can reach 500*900mm, but the outlet can be as small as 10mm, which is as big as a fingernail.

5. Compared with belt type, our maintenance is more convenient. We only need to fill reserved grease ports regularly.

6. Crushing construction waste/concrete- discharge hole 4cm- one hour crushing about 40-50T.

Crushing Blue stone( hard rocks)- discharge hole 4cm- one hour crushing about 20T.

1.Belt drive reduces damage to the excavator hydraulic system and reduces after-sales costs

2.Widest crusher mouth opening of the equipment, available in China market (910*510mm).

3.Guaranteed output productivity even with worn-out jaws

4.The feed port is 10mm thicker, making it more wear-resistant

5.Special processing technology, better coaxiality and longer service life

6.High strength wear-resistant plate increased life-time more than 30% The jaw plate is made of Mn18cr2 material, The framework uses NM400

RMB80 Crusher Bucket Customer Photos

RMB80 Crusher Bucket Recommend Products

RMB80 Crusher Bucket Packing & Shipping

Wooden box or steel plate or wooden plate.

Concrete Jaw Hardox Stone Asphalt Concrete Crusher Bucket for 20-27T Excavator

Product Description