RMB80
RAY Attachments
Availability: | |
---|---|
Model | RMB80 | RMB120 | |
Excavator | Ton | 20-27 | 33-40 |
Weight | Kgs | 3500 | 5500 |
Bucket capacity | cbm | 0.8 | 1.3 |
Size | mm | 2080*1425*1600 | 2500*1650*1800 |
Bucket opening size | W*H(mm) | 910*510 | 1350*540 |
Hydraulic motor | oil pressure(bar) | ≤230 | ≤230 |
Oil quantity(L/min) | 150-200 | 190-230 | |
Output(T/H) | 20mm | 12 | 20 |
30mm | 15 | 25 | |
40mm | 18 | 28 | |
50mm | 22 | 30 | |
60mm | 25 | 33 | |
70mm | 28 | 35 | |
80mm | 30 | 40 | |
90mm | 33 | 43 | |
100mm | 35 | 47 | |
110mm | / | 50 | |
120mm | / | 55 | |
130mm | / | 5 |
Crushing Blue stone( hard rocks)- discharge hole 4cm- one hour crushing about 20T.
1.Belt drive reduces damage to the excavator hydraulic system and reduces after-sales costs
2.Widest crusher mouth opening of the equipment, available in China market (910*510mm).
3.Guaranteed output productivity even with worn-out jaws
4.The feed port is 10mm thicker, making it more wear-resistant
5.Special processing technology, better coaxiality and longer service life
6.High strength wear-resistant plate increased life-time more than 30% The jaw plate is made of Mn18cr2 material, The framework uses NM400
Model | RMB80 | RMB120 | |
Excavator | Ton | 20-27 | 33-40 |
Weight | Kgs | 3500 | 5500 |
Bucket capacity | cbm | 0.8 | 1.3 |
Size | mm | 2080*1425*1600 | 2500*1650*1800 |
Bucket opening size | W*H(mm) | 910*510 | 1350*540 |
Hydraulic motor | oil pressure(bar) | ≤230 | ≤230 |
Oil quantity(L/min) | 150-200 | 190-230 | |
Output(T/H) | 20mm | 12 | 20 |
30mm | 15 | 25 | |
40mm | 18 | 28 | |
50mm | 22 | 30 | |
60mm | 25 | 33 | |
70mm | 28 | 35 | |
80mm | 30 | 40 | |
90mm | 33 | 43 | |
100mm | 35 | 47 | |
110mm | / | 50 | |
120mm | / | 55 | |
130mm | / | 5 |
Crushing Blue stone( hard rocks)- discharge hole 4cm- one hour crushing about 20T.
1.Belt drive reduces damage to the excavator hydraulic system and reduces after-sales costs
2.Widest crusher mouth opening of the equipment, available in China market (910*510mm).
3.Guaranteed output productivity even with worn-out jaws
4.The feed port is 10mm thicker, making it more wear-resistant
5.Special processing technology, better coaxiality and longer service life
6.High strength wear-resistant plate increased life-time more than 30% The jaw plate is made of Mn18cr2 material, The framework uses NM400