Bucket is used to dig the soil, sand, gravel and other construction waste loose material with a bucket shaped component, which is composed of floor, wall, hanging lug, ear plate, tooth plate, plate edge, bucket teeth, teeth and other parts. It is often installed in excavators used to excavate a work

RAYATTACHEMHTS Hydraulic breaker referred to as "broken hammer" or "breaker". Hydraulic breaker’s power source is excavators, loaders or pumping stations’ pressure. It can break stones and rocks more effectively in the engineering construction. Selection of hydraulic breaker principle is according t

1) Read the operation manual of the hydraulic breaker carefully to prevent damage to the hydraulic breaker and the excavator, and operate them effectively.2) Before operating, check the bolt and the connection head whether loose or not, as well as the hydraulic pipeline whether leak or not.3) Don't

The world first breaker was born in German Krupp company , now Krupp has been the acquisition of atlas. Atlas in China, sale of the breaker production is in Shenyang. The second is montabert. Montabert , France. Now has been the acquisition of Doosan Corporation. After the origin spread to the Unite

Changzhou Raymond International Trading Co.,Ltd should be there. We specialized in earth auger ,digger attachments. As the demand and development of the market, hydraulic auger driller , quick coupler ,hydraulic shear and hydraulic crusher that has become our main product for the domestic and forei

Building work requires piling for the construction of any modern building. The piles are left 1 to 2 meters above ground level, these need to be removed leaving the rebar in place. The RAYMOND Pile Breaker is the perfect solution by precise and quick crushing of these foundation piles. The RAYMOND

Hydraulic Vibro ripper is used for excavator. Before using a vibro ripper, please follow the instructions of excavator and start excavator engine correctly.According to the vibro ripper, put the deployment of excavator engine speed to the vibro ripper needs.The following operation please refer to th

1.Fault condition:Safety pin does not worked.(The quick hitch would not disengage)CheckCause and maintenance methodsCheck the hose which connected to battery if it is cut or disconnected.Recheck the line “+” and “-”, and reconnect.Check the connection switch fuse Change a fuse.Check if the connector

1、Main body installation Put excavator and quick connector at relatively flat,and make the fixed jaw of quick hitch and the forearm of excavator alignment is easy to install(as below picture) Operating excavator, Align excavator forearm shaft hole and the shaft hole of quick connector,th

For a long time, the engineering machinery construction users are trying to improve the efficiency of the equipment construction, save construction time and fuel consumption, improve the return on investment returns. However, in addition we are in the pursuit of excellence brand, high performance pr