Suitable for 50 tons of large excavators

Final Report From Bauma Press:l RAY Attachments Visited Bauma Munich in 8th-14th, April 2019.l More than 620,000 visitors from 200 countriesl Around 3,700 exhibitors from 63 countriesRAY attachments visited Bauma Munich in 8th-14th, April 2019. Without doubt as the innovation platform and economic e

The vibrating sinking pile machine uses its high-frequency vibration to vibrate the pile body at high speed, and transmits the vertical vibration generated by the machine to the pile body, which causes the soil structure around the pile body to change due to vibration, the strength is reduced, and t

Operating principle: 1. The high-frequency pile driver has two eccentric shafts driven by hydraulic motor to generate high-speed rotation and vertical resonance excitation force. By damping the rubber block, maintaining the amplitude of 3-8mm can meet the requirements of various types of soil p

It is necessary to read this operating manual before starting the operation or work.1. Before the operation, check whether the lubricating points of VIBRO RIPPER are filled with grease!2. Whether the hydraulic system's various hydraulic pipe joints are firmly connected.

What’s pile breaker? It is an equipment for concrete cropper. It can be easily operated with high efficiency, low noise, low cost, safety and reliability, without any impact on the main body of the pile, and without any effect on the load-bearing capacity of the pile as well. You may focus on the si

RAY ATTACHMENTS Hydraulic Vibro hammer can be applied in pile driving and pulling cement piles, steel track piles, iron plate and H steel pipes. It can pile piling and pulling between quickly change conversion operations.

In 2017, China's economy is growing strongly, shifted from rapid growth to high-quality development and usher in a new round of golden opportunities!Reasonable use of the auger drive is a concern of engineers from all over the world.Continuing the upward trend of 2016, the whole construction machine

What’s Pile Hammer" vibratory hammer" is a tool used to drive piles in or out of the ground for building marine docks, bridges, buildings, roads, rail, walls, and many other types of foundations.The range for suitable excavator is from 20-40T. The pile length is 9m to 16m. Vibratory pile hammers con

1. The operator of the vibration pile driver must be familiar with the structure, performance, operation essentials and safety precautions of the machine. After passing the examination and obtaining the certificate, it can be operated separately.Second, the operator must concentrate on the operation