-
You are right! Elastomeric rubber plays a very important role, in absorbing shocks transmitted to the base robot boom, and when driving or mining. We use two different sizes of elastomeric rubber, each with a maximum shear load of over 2 tons. Additionally, a small safety bar is housed inside the suppressor to prevent the elastomer from being dropped by the crane being over-pulled or pulled back.
-
A wide variety of products, Fast, reliable and simple shovel connection, Ergonomic design provides convenient use, move around the link yoke with complete safety, high performance and towing/extraction capabilities, minimal vibrations are transmitted to the environment, Double or single clamped steel pipe piles can be driven easily and powerfully, Robust, reliable and long lasting.
-
Connect the pressure and return hoses to the flow meter from the excavator. Make sure the hose is properly connected to the correct port on the flow meter. Adjust the pressure of the flow meter with the restrictor to the pressure required by the vibrator, and at the adjusted pressure, set the required flow with the regulating valve of the main pump of the excavator.
-
RAY Vibro Hammer machines, also known as vibratory drivers and vibratory hammers, work to reduce the resistance of the ground to vibrations and change the formation of the ground. The vibratory pile driver transmits vertical vibration to the pile through hydraulic clamps. This, in turn, transmits vibrations to the ground, reducing the friction between the pile and the ground, allowing the pile to be driven in or out with less force. The pile is driven into the ground by a combination of the weight of the vibrator and the centrifugal force it generates.
-
A vibratory hammer saves time and money as it drives into the pile faster, They can be used to strike and pull piles out of the ground, They can be used underwater It's simple and easy to use, They can be used for crane and excavator dependencies. Crane hammers are used in projects that require high impact/demolition performance, and they provide the required energy through a power pack. It has eco-friendly technology (especially for protecting animals). They are powered by hydraulic or electrical lines, but hydraulic lines are becoming more popular because they are lighter and stronger. They are small and easy to transport and maintain. Vibratory hammers are much less expensive than traditional hammer drives.
-
A pile is a machine that drives piles into the ground to form the foundation of a structure. It works by twisting the weight on a pile surrounded by a guide frame. The weights will then be released to fall and hit the piles against the ground below.
-
To select the right vibratory hammer for a given job, some general rules are recommended, such as ground conditions, power of the vibratory hammer, weight of the pile, weight of the hammer and type of pile.
-
A vibratory hammer is a tool used to drive piles into the ground when constructing foundations for objects such as bridges, buildings, roads, marine piers, walls or railways
