-
Q What are the misconceptions people have about hydraulic quick hitch?
A Generally speaking, it is always assumed that quick coupler are used when attachments are frequently switched. But in fact, it can also be used for quick changes between two excavator attachments of the same type.
-
Q What I need to look out for after installation?
A Once the installation is complete, you need to take care of two things. Firstly make sure that all the nuts and bolts are in a solid condition. Secondly if your machine has a filtration system, make sure it is in working order
-
Q How does the hydraulic quick hitch work?
A A quick connector is an accessory used to connect excavators and other mechanical parts, it is usually connected to the hydraulic cylinder of the power output shaft to achieve speed and quickness by quickly changing the type of connector
-
Q What is the weight limit for the Quick Hook Coupler in use?
A The weight limit is related to the strength of the quick hitch coupler. Generally speaking, quick hinge couplers can handle loads weighing between 10 and 70 tonnes. Some heavy couplers can lift up to 90 tonnes. But your machine has to be able to handle the weight of the quick hitch coupler.
-
Q How to choose a quick hitch coupler?
A 1) Adaptation. You need to determine the horsepower and maximum pressure of your machine.2)Durability. If you only use it occasionally, choose a lighter model. If you use it regularly, the heavier units are better able to withstand the weight and pressure of the machine.
-
Q Why should I use Quick Hitch?
A It has the advantage of speed and convenience. It would take 45 minutes to remove and replace by hand. Whereas a quick coupling only takes 10 seconds
-
Q What is a Quick Hitch Coupler?
A It is an accessory. With it, you can quickly complete the connection of excavators and other large machine accessories.
-
Q Which other attachment including?
A The attachment for your excavator includes: “Head” with rotator and Patented jaw design. “Arms” with dual restraint arms that mount in place of existing dozer blade. Optional “Hinge” brackets and valve to allow installation on excavators without existing dozer blade.
-
Q What about the catalytic converters?
A Catalytic Converters Exhaust manifold mounted catalytic converters Pull engine to access hard to reach catalytic converters Other high value materials.
-
Q How to remove axle and suspension components?
A Extra profit from extraction of heavy steel axles and suspension Pin the vehicle down with the clamp legs and use the RAY dismantling grapple to pull the axle and suspension components from the lower value vehicle shell.
-
Q What about the out with the engine?
A The slender plier-like legs of the grapple make it perfect for seeing into the engine bay to perfectly place the legs around the engine and pull it out in only a few seconds.
-
Q What does a dismantling shear look like?
A Like a vulture would dissect its prey, the RAY clamp arms pin down the vehicle to allow the grapple to systematically pull the valuable materials away from the lower value vehicle body shell.
-
Q What are the benefits of dismantling a car?
A Traditional manual methods of removing high value materials from end-of-life cars and vehicles can be labour intensive and costly, in many cases making the process economically unviable. Although a four-tine scrap grab will allow extraction of the engine, much of the added value materials are left behind, resulting in the end of life vehicle dismantler missing out on great potential profit.
-
Q What about the car dismantler advantages?
A The RAY Car Dismantler is the ultimate combination of power and dexterity. The grapple features a slender, plier-like shape providing an unbroken line of sight from the operator to the vehicle, allowing valuable materials such as the copper wiring loom to be extracted from even the tightest of areas. High power hydraulic cylinders and high torque rotation unit give the RAY Car Dismantler the power to effortlessly dissect the vehicle.
-
Q How does scrapping a car work?
A All cars going through the scrapping process need to be taken to an authorised government treatment facility in order to undergo the depollution process, according to legal guidelines. In this process, all parts of the car that can't be used as scrap are removed, disposed of and recycled.
-
Q How to choose eagle shear?
A According to excavator weight.
-
Q What are our eagle shear advantages?
A The mini shear is made with durable tool steel and its cutting blades are reversible with multiple cutting edges making them easy to shim, re-sharpen, and replace. This allows the hydraulic shear of 1-9 tons to deliver increased power, performance, reliability, and cost savings.
-
Q What kind of materials will you be cutting?
A Rotating hydraulic shears are ideal for cutting ferrous metals (materials containing iron), non-ferrous metals like aluminum, and tire processing, especially large OTR/mining tires. It is important to note that excavator mounted mobile demolition shears are not made to cut through cast or specially hardened materials, and that they will have a hard time cutting fibrous materials like cable.
-
Q How thick are the materials being cut?
A While rotating hydraulic shears are available in a variety of different sizes, the largest shears on the market can typically pierce up to 1.61″ thick plates and process 7″ diameter solid rounds; however, generally, the largest shears that you would see available for rent to contractors in Western Canada can pierce 1.38″ plates and process 5.5″ solid rounds.
-
Q What does a shear look like?
A A shear is a cutting implement that looks like a long pair of scissors. Also like scissors, this form of the noun is usually plural. You can cut metal, prune a tree, or cut up a chicken with shears.