A High-performance strength meets state-of-the-art agility with the Extractor from RAY Attachments - the versatile demolition and sorting grapple capable of demolishing buildings, moving large volumes of material and picking up fine recyclables. Designed for tough jobs, the puller is made with Hardox Wear Plates and Strenx steel and moves higher volumes of material using less fuel - cycle after cycle The puller rotates 360 degrees and features flexible operation of the jaw with edge-to-edge contact, reversible cutting edges and zero clearance design for maximum productivity.

A Standard tool for almost any application. Medium to hard rock or reinforced concrete, very effective in breaking down densely reinforced concrete. Chisel/wedge tool. Suitable for weak sedimentary and metamorphic rocks that require splitting.

A The chisel carries part of the hydraulic breaker. The chisel tip will wear out during the working process, and it is mainly used in operation sites such as ore, platform, concrete, ship, slag and so on. Need to pay attention to daily maintenance, such as replacing inner and outer bushings, adding grease, etc. Otherwise, the chisel will break. Therefore, the correct selection and use of chisels is the key to reducing hydraulic breaker losses.

A 1. Appropriate down force can improve the efficiency of hydraulic breaker. 2. The position of the hammer breaker adjustment - when the hammer breaker cannot break the rock, it must be moved to a new hitting point. 3. The cut-off operation should not be operated continuously at the same place. The chisel temperature would rise when breaking at the same position for a long time. The hardness of the chisel would be reduced to damage the tip of the chisel, thereby reducing the operation efficiency. 4. Do not use the chisel as a lever to lift stones. ​​ 5. Please drop the excavator arm in a safe state when stopping the operation. Do not leave the excavator when the engine is started. Please ensure that all braking and locking devices are in an ineffective condition.

A During operation, the direction of the chisel and the excavator arm should be the same, and the chisel should be perpendicular to the rock surface. If the chisel is not perpendicular to the rock surface, the chisel may slip while working. When breaking, first adjust the direction of the chisel, and then under stable conditions, start breaking the stone at the correct meeting point of the stone.

A 1. First remove the stop pin and the 330mm long chisel pin. For the next installation, insert the chisel into the pin while the chisel is in a horizontal position. 2. When reassembling, please follow the reverse order of disassembly. First check all parts for wear or cracks. If the chisel is deformed, it should be polished and repaired. The entire bit should be lubricated before installing the bit. If the chisel pin is badly deformed, it will be difficult to replace the chisel. So be sure to check the chisel and chisel needle every 100-150 hours.

A 1. Flat chisel/wedge chisel: suitable for excavating soft neutral rock formations, breaking concrete and digging trenches. 2. Sharp chisel: suitable for excavation and crushing of hard rock, extra-hard rock and reinforced concrete. 3. Conical chisel: It is mainly used for crushing hard rocks such as granite and quartzite in quarries, and it can also be used for crushing heavy concrete. 4. Blunt chisel: mainly used to break medium-hard rock or small gravel to make it smaller

A The chisel is the consumable part of the hydraulic blasting hammer. The tip of the chisel will wear out during the working process, and it is mainly used in construction sites of ore, roadbed, concrete, ships, slag, etc. Routine maintenance is a must, so the correct selection and use of chisels is the key to reducing the loss of hydraulic hammer crushers.

A Skid steer hydraulic driven

A Determine the full working length of the boom by measuring (as a straight line) from the centre of the pin hole where the excavator is attached to the boom to the centre of the pin hole where the boom is attached. Measure the inside width of the boom pin hole at the far end of the boom to boom connection.

A Skid steer hydraulic driven

A hedge trimmer, shrub trimmer, or bush trimmer is a gardening tool or machine used for trimming (cutting, pruning) hedges or solitary shrubs (bushes). Different designs as well as manual and powered versions of hedge trimmers exist.

A 1. We pack the bucket by standard wooden pallets for export and standard wooden crates for export which are Seaworthy, steel pallets; 2. Fast delivery time: 5-7days for small quantity, 15-30days for container quantity; 3. We have a team specialized in packing and loading containers, who have rich experience, and we can load the maximum quantity of digging buckets and parts, to help customers save the sea transportation.

A A demolition grapple does just what its name says: it grabs hold of scrap and debris and moves it out of the way, deftly handling a myriad of materials, from rebar to insulation.

A A demolition grapple does just what its name says: it grabs hold of scrap and debris and moves it out of the way, deftly handling a myriad of materials, from rebar to insulation.

A Features 1) Structural design based on CAD drawing, 3D drawing and finite element analysis for greater durability and efficiency, saving time in the workshop. 2) All steel is sourced from the best steel mill in China 3) The pipes are all phosphated with good corrosion and rust resistance, unlike common steel pipes widely used in the market, which can better protect the hydraulic system and provide more power for the work. 4) Copper bushings are used in the connections instead of the common steel bushings widely used in the market.

A We produce three series of grapples for global forestry, optimized for forwarders and truck cranes as well as chippers. Whichever series you choose, it has been made to allow you to work efficiently with absolute control and precision.

A Long Reach Package Includes: Long Arm/Stick Long Boom Bucket Hydraulic Cylinders (For Arm & Bucket) Pre-Plumbed Hydraulic Lines *Excavator not included

A Cutting function In addition to the timber grapple, the saw grapple is available with a cross-cutting function, optionally with a chainsaw or a fixed blade. A chainsaw can cut, but does not prevent completely filling the grip shells with stone. The fixed blade, on the other hand, gets in the way when moving multiple logs or branches and is not suitable for skipping a lot of stone

A As one of the leading rock grapple manufacturers in China, RAY provides a complete line of rock grapple for 3-40 ton excavator. They are suitable for all kinds of excavator brands and models.